28
D
ESK
T
OP
S
ERIES
–
AUTOMATIC OPERATION
Activate the long cylinder
Make sure the thermode position is
correctly set.on the first bond position
Note: The thermode position is similar or
at the back of the bond position!
Fine adjustment to the front is possible:
1.
Loosen bolt 1A
2.
Turn in bolt 1B in until desired
thermode position is reached
3.
Tighten bolt 1A
Position 3: second heat-seal/bond
position (under thermode)
Status:
−
Long cylinder: in
−
Short cylinder: out
1A 2A
2B
1B