41
D
ESK
T
OP
S
ERIES
–
AUTOMATIC OPERATION
2.2 MANUAL CONTROL
In this mode it is possible to test the two-
hand control and activate the different
cylinders or generate a start to the Uniflow
Key switch in production:
Test hand control disabled
Key switch in service:
Press the two hand control simultaneously
to test the buttons
Press [
] to go to the next screen:
2.2.1 Slide manual
Key switch in production:
Slide control disabled
Key switch in service:
Press [F1] to activate the slide (cylinder)
Status Pos. 1: Inlay/dispense position is
reached
Status Pos. 2: Head/heat-seal position is
reached
Press [
] to go to the next screen:
2.2.2 Head manual
Key switch in production:
Head control disabled
Key switch in service:
Press [F1] to activate the head (cylinder)
Status Home: home-level is reached
Status Fire: fire-level is reached
Press [
] to go to the next screen:
2.2.3 Tape manual
Key switch in production:
Tape control disabled
Key switch in service:
Press [F1] to activate the slide (cylinder)
Status Pos. 1: Inlay/dispense position is
reached
Status Pos. 2: Head/heat-seal position is
reached
Press [
] to go to the next screen:
