8
D
ESK
T
OP
S
ERIES
–
AUTOMATIC OPERATION
2
INTRODUCTION
2.1
GENERAL
This user manual makes sure new users are familiar with the operating and maintenance
procedures, while experienced users may use this document as a reference work. References
to other documents are made when necessary.
Operators and technicians using the machine for the first time should study this manual
carefully, in particular the safety instructions given in section 1.
Additional training by Miyachi Europe Corporation is recommended if the user wants to
become quickly familiar with the system. The training course consists of, among other things,
training in the completely independent operation of the system. Knowledge transfer should
not only take place by circulating this manual among the operators, but by practising with the
equipment and doing practical work with the machine.
The manual is based on current techniques. Miyachi Europe Corporation retains the right to
make changes to the documentation without being obliged to alter all previous versions.
Keep this instruction manual carefully for future use.
To underline certain subjects or actions the following markings are used in the text.
Tip
Suggestions and advice for carrying out certain tasks more easily.
NOTE:
The statement concerned is to draw the user's attention to possible
problems.
WARNING:
If the procedure is not performed carefully the users can injure
themselves or others or seriously damage the system.
NOTE:
Figures in this manual may not be exactly as shown.
