32
D
ESK
T
OP
S
ERIES
–
AUTOMATIC OPERATION
Make sure the roller (A) that activates the
micro switch (B) cannot pass the lever.
Note: This will damage the micro switch.
The left to right
movement of the
slide is 140 mm
4.3.3
DT-450 systems
Do the adjustments of the Bond head in accordance with the applicable manual: 69H0082
(80N) or 69H0504 (500N).
The turntable stop positions are set on production. If no product support is provided, the
thermode height is set at approximately 40mm above the turntable. The steps that follow
show how to set the turntable height. Further adjustments can be made by Miyachi trained
persons.
A
B
