49
D
ESK
T
OP
S
ERIES
–
AUTOMATIC OPERATION
Uniflow parameters
Key switch in production:
Uniflow parameters timeout disabled
Key switch in service:
Press [enter] to change value.
Press [
] or [
] to select the desired value,
the maximum time within the Uniflow power
source has to respond.
Press [enter] to confirm this value.
Press [
] to go to the next screen:
Counter readout
Key switch in production:
Counter parameters disabled
In this manual menu the total count of products
is shown and it is possible to clear this value
Press [F4] to clear this value.
Press [
] to go to the first screen again
TD200 MODE
Press [
] or [
] to select the desired menu:
•
Operator Menu
•
Diagnostic Menu
•
Display Alarms
Press [enter] to confirm
The operator and diagnostic menu are TD200
panel menu’s and don’t need any adjustments.
Readout the alarms; see next section
5.5.5
TD200 screens DT-450 (Options)
Some versions of the DT-450 have extra options. Below is a selection of TD200 optional
screens
.