7
D
ESK
T
OP
S
ERIES
–
AUTOMATIC OPERATION
Table 1: Pictograms on the Desktop system
Warning: There is a risk of direct or indirect contact to live parts.
Access is only allowed for technically qualified personnel.
Labels are placed on the outside and the inside of the system and on
connection boxes near to live parts.
Warning: Risk of getting crushed between moving parts.
Labels are placed near moving parts.
Hot surface:
Burning risk at the thermode and machine covers.
Make sure that the machine has cooled sufficiently before you carry out
maintenance work.
General safety symbol
Ensure the machine is only switched on when all the guards are in place.
Keep the machine work table free of obstacles.
Earth (Ground) point
The label is placed on the left side of the system..
Warning: There is a risk of direct or indirect contact with live parts when
covers are open.
Labels are placed on the outside of the control cabinet.
Warning for maintenance and repair to make sure the main switch on the
rear of the system cannot be switched on unintentionally.
Recycling note: All parts of the Desktop system must be removed for
recycling in accordance with local regulations, preferably to a company that
can enable reuse of the materials.
NOTE:
Regularly check if all pictograms are still in place on the unit.
If they are not, replace them as quickly as possible.
