40
D
ESK
T
OP
S
ERIES
–
AUTOMATIC OPERATION
[ENTER]
Enter key to store the entered values into the RAM memory.
For further details refer to the TD200 controller manual .
5.5.2
TD200 screens DT-350, DT-360, DT-370
2.1 START PROCESS MODE
After switching on the system:
Software version readout and
“initialisation” message.
Main production screen.
Press [ENTER] to go to the start process
screen:
To start production:
Press the two hand control simultaneously
until head moves downwards.
OR
Press [
] to go to the next screen:
Enter, by means of the numeric keys, the
required number of cycles for the required
length of tape feed.
Press [
] to go to the next screen:
Enter, by means of the numeric keys, the
required number of products within which
the tape feed has to joggle.
Press [
] to go to the next screen:
Press [
] or [
] to go to time set by
Uniflow. (Time set is always 0)
Time set is adjustable only by constant heat
version.
Message “busy” after firing of the head /
starting Uniflow.
Warning; when the Uniflow is turned
OFF, message “busy” will stay on the
screen!
