42
D
ESK
T
OP
S
ERIES
–
AUTOMATIC OPERATION
2.2.4 Emergency stop manual
Emergency stop
Emergency stop pushed by operator or
generated by Uniflow
Status: “active” or “ not active”
Internal E-stop
Emergency stop generated by PLC
software
Status: “active” or “ not active”
Press [
] to go to the next screen:
2.2.5 Uniflow manual
Key switch in production:
Uniflow control disabled
Key switch in service:
Press [F1] to start the Uniflow power
source
Warning; the Uniflow will heat up
automatically after pressing [F1]!
Status:
•
Ready
•
Busy
•
Alarm
Press [
] to go to the next screen:
2.2.6 Bond positions
Key switch in production:
Bond positions disabled
Key switch in service:
Press [F1] to choose between 1 or 2 bond
positions
Press [ESC] to go to a main menu (for example: “Parameters menu”)
Press [ESC] again to go to the “display alarms menu” to readout the alarms
Press [Enter] to go to acknowledge the alarms.