Mitsubishi NZ2GF2B-60DA4, User Manual

Page: 52 / 174

50
Do not slide modules from the edge of the DIN rail when mounting them. Doing so may damage the metal part located on the
back of the module.
(2) Removal procedure
Remove the modules from the DIN rail by reversing the above procedure.
(3) Applicable DIN rail model (compliant with IEC 60715)
• TH35-7.5Fe
• TH35-7.5Al
6.
Hitch the upper hook of the DIN rail stopper to the
top of the DIN rail.
7.
Slide the DIN rail stopper up to the left side of the
modules.
8.
Hold the DIN rail stopper in the direction opposite to
the arrow on the stopper and tighten the screw with
a screwdriver.
9.
Install the DIN rail stopper on the right side of the
module in the same procedure.
Install the stopper upside down for the right side.
Hitch the hook to
top of the DIN rail
DIN rail
stopper
DIN rail
stopper
DIN rail
stopper