Mitsubishi NZ2GF2B-60DA4, User Manual

Page: 51 / 174

49
CHAPTER 6 INSTALLATION AND WIRING
6
6.3 Installa
tion
6.3.2 Mo
unting
the modules on a DIN r
ail
6.3.2
Mounting the modules on a DIN rail
An example of the use of the DIN rail stopper is described in the following procedure. Fix the module according to the
manual of the DIN rail stopper used.
(1) Mounting procedure
1.
Pull down all DIN rail hooks on the back of the
modules.
The levers should be pulled down until it clicks.
2.
Hang the upper tabs of the modules on a DIN rail,
and push the modules in position.
3.
Lock the DIN rail hooks to the DIN rail to secure the
modules in position.
Push each hook up until it clicks. If the hooks are
beyond the reach, use a tool such as a screwdriver.
4.
Loosen the screw on DIN rail stopper.
5.
Hitch the bottom hook of the DIN rail stopper to the
bottom of the DIN rail.
Hitch the hook according to the orientation of the arrow
on the front of the stopper.
Hook
Hook
Hitch the hook to
bottom of the DIN rail