20
2)
PW LED (green)
Indicates the operating status of the D/A converter module.
ON
Power supply ON
OFF
Power supply OFF
RUN LED (green)
Indicates the operating status of the D/A converter module.
ON
Operating normally.
Writing data to the nonvolatile memory in the offset/gain setting mode.
OFF
A major error has occurred or in the offset/gain setting mode.
MODE LED (green)
Indicates the mode of the D/A converter module.
ON
In online mode.
Flashing
In unit test mode.
OFF
In offset/gain setting mode.
D LINK LED (green)
Indicates the data link status of the D/A converter module.
ON
Data link in operation. (cyclic transmission in progress)
Flashing
Data link in operation. (cyclic transmission stopped)
OFF
Data link not performed. (disconnected)
ERR. LED (red)
Indicates the error status of the D/A converter module.
ON
A moderate error or major error has occurred.
Flashing
A warning has occurred.
OFF
Operating normally.
ALM LED (red)
Indicates the alert status of the D/A converter module.
ON
Alert has occurred.
Flashing
An out-of-range digital value error has occurred.
OFF
Operating normally.
O/G LED (green)
Indicates the module is in the offset/gain setting mode.
ON
In offset/gain setting mode.
OFF
In a mode other than the offset/gain setting mode.
V LED (green)
I LED (green)
Indicates the user range setting for the selected setting in the offset/gain setting mode.
CH1 to 4 LED
(green)
Indicates the channel for the selected setting in the offset/gain setting mode.
ON
The channel of the number for which the LED turns on is the setting target.
OFF
The channel of the number for which the LED turns off is not the setting target.
OFFSET LED (green),
GAIN LED (green)
Indicates whether the selected setting is offset or gain in the offset/gain setting mode.
No.
Name
Application
Setting target
V LED
I LED
User range setting 1 (voltage)
ON
OFF
User range setting 2 (current)
OFF
ON
Setting target
OFFSET LED
GAIN LED
Offset
ON
OFF
Gain
OFF
ON
Summary of Contents for NZ2GF2B-60DA4
