Mitsubishi MELSEC-F FX-TRN-BEG-E, User Manual

Page: 159 / 164

FX-TRN-BEG-E
D-29
Virtual PLC
Question Answer
How can I switch the RUN mode and
STOP mode in the virtual PLC?
There are several ways to do it. (No RUN/STOP switch)
•
Switched to STOP mode when you click [Edit Ladder] on
the remote control.
• Switched to RUN mode when you write your program to the
PLC in STOP mode.
• Switched to STOP mode and then to RUN mode when you
click [Reset] on the remote control.
• Switched to STOP mode when you write your program to
the PLC in RUN mode.
When is the program inside the virtual
PLC cleared? The program is cleared when you go to the main menu or exit
the software.
Simulated Machine
Question Answer
Can I add sensors?
No. The device assignment in machines is determined in
advance. You cannot add or change them. Can I change the device assignment?
Can I change the operations of
machines?
Do I need to wire the virtual PLC to the
machines?
No. They are wired virtually inside your computer.
Can I restart the operation of the
machine if the machine stops or parts
are stuck? Yes. Click [Reset] on the remote control to reset the I/O status
of the PLC and return the screen to the initial status.
(The program is saved in the PLC.)
Can I perform the operations different
from the ones shown in the guidance?
Yes. There is more than one way to control the machines.
When does the person appear in the
3-D graphic simulation? In most cases, the person appears to collect parts when
certain amount of parts are put in the tray.
How do I speed up the operation of the
simulation machines?
When the performance of the computer is improved, the
operation speed of the machines is improved accordingly.
If you have the unwanted situation such as 'the input data from
a sensor is not received properly', speed adjustment is
required.
Operation panel
Question Answer
Can I add switches and lamps?
No. Assignment of switches and lamps on the panel are
determined in advance and cannot be added or changed.
Can I change the device assignment?
Can I change or add letters and
phrases displayed?
Can I change the lamp colors?
Can I use the switches and lamps the
guidance does not talk about? Yes. Such switches are wired to the virtual PLC. You can use
them as your own operation switches and indicator lamps.
User registration/self-judgement
Question Answer
What is the advantage of being a
registered user?
In the main menu, a 'good' award and the number of times the
exercise has been completed is displayed on the exercise
button and your total score is listed at the bottom.