Mitsubishi MELSEC-F FX-TRN-BEG-E, User Manual

Page: 57 / 164

FX-TRN-BEG-E C: Easy Does It! 3
B-29
3.2.3 Points of training and control specifications
1) Off-delay timer
The timer turns the output OFF after a set period of time.
• When X020 is set ON, Y005 turns ON as
indicated in line A.
• When X020 is set OFF, Y005 is latched
and timer T1 turns ON as indicated in line
B.
• After the set value of timer T1 elapses
(K30 = 3 sec), C turns OFF, and the OUT
instruction Y005 and T1 are turned OFF.
2) One-shot timer
The timer keeps the output ON for a set period of time.
(Even if the input for operating the timer remains ON, the output is turned OFF after a set
period of time.)
• When X021 is set ON, Y006 and T2 turn
ON as indicated in line A. X021 is turned
ON instantaneously by the rising edge
detection instruction. Even if the input of
X021 is kept ON, the contact turns OFF.
• The latched output instruction enables
Y006 and T2 to remain ON as indicated in
line B.
• After the set time of the timer T2 elapses
(K50 = 5 sec), C turns OFF and then the
OUT instruction Y006 and T2 are turned
OFF.
3) Lighting the lamps using timers
• When the switch (X020) is set ON, the
"red" lamp (Y005) is lit. Three seconds
(T1) after the switch (X020) is set, the
"red" lamp is extinguished.
• When the switch (X021) is set ON, the
"green" lamp (Y006) is lit. Even if the
switch (X021) remains ON, the "green"
lamp is extinguished five seconds (T2)
later.
X020
Y005
Y005
A
B
T1
X020
T1
K30
C
B
X020
Y005
Set value of T1 (3 sec)
Off-delay time
X021
Y006
Y006
A
B
T2
T2
K50
C
A
B
X021
Y006
Set value of T2 (5 sec)
X020
Y005
Y005
T1
X021
Y006
Y006
T2
T1
K30
T2
K50
X020