Mitsubishi MELSEC-F FX-TRN-BEG-E, User Manual

Page: 148 / 164

FX-TRN-BEG-E
D-18
C-5: Machine
Machine parts such as conveyors and lifters are explained here.
C-5-1: Conveyor (standard)
The conveyor carries parts.
* The motors for forward rotation and reverse rotation are built in the conveyor and not displayed.
* The mechanical interlock between the motor for forward rotation and the motor for reverse
rotation is provided inside the machine simulated. Even if both of them are operated at the same
time, they are not damaged, but the conveyor does not move.
Sensor
- Sensors are provided according to the exercise.
C-5-2: Conveyor (with sorting wing)
The conveyor distributes parts (large ones and small ones, for example) in two directions.
• Appearance (side view) • Operation
Conveyor forward/reverse command
- An output (Y) is assigned to each of
forward and reverse movement.
When the output (Y) is set to ON, the
conveyor moves.
* In some exercises, an output (Y) is
assigned to either normal or reverse
movement.
Reverse
↔
Forward
Sensor
Sensor
Indicator for
forward rotation
Indicator for
reverse rotation
• Appearance (side view) • Operation
Conveyor operation command
- An output (Y) is assigned to the conveyor.
When the conveyor output is set ON, it
moves to the right.
- The motor built in the conveyor is not
displayed.
Sorting wing
- An output (Y) is assigned to the sorting
wing.
While the output is ON, the sorting wing
turns to the front and parts are carried to
the rear conveyor.
While the output is OFF, the sorting wing
turns to the rear and parts are carried to
the front conveyor.
Sensor
- Sensors are provided according to the
exercise.
Part carrying
direction
Output ON Output OFF
Sensor
Sensor
Sorting
wing
Sensor
Motor