Mitsubishi MELSEC-F FX-TRN-BEG-E, User Manual, Page: 95 / 164

FX-TRN-BEG-E F: Advanced Challenge 6
B-67
6.2.3 Control Objective
Control stage settings including opening/closing curtains and raising/lowering the stage.
6.2.4 Control Specifications
Specifications for automatic operation
1) When [Begin] (X16) on the operation panel is pressed, Buzzer (Y5) sounds for 5 seconds.
[Begin] (X16) can be set ON only while the curtains are closed and the stage is located at
the lower limit.
2) When the buzzer stops, Curtain open command (Y0) is set ON and the curtains are
opened until they reach their outward limits (X2 and X5).
3) After the curtains are completely opened, the stage starts to move up when Stage up (Y2)
is set ON and it is stopped when Stage upper limit (X6) is set ON.
4) When [End] (X17) on the operation panel is pressed, Curtain close command (Y1) is set
ON and the curtains are closed until they reach their inward limits (X0 and X3).
Specifications for manual operation
1) The following operations are enabled only while the automatic operation described above is
not in operation.
2) The curtains can be opened only while [Curtain open] (X10) on the operation panel is being
pressed. The curtains stop at their outward limits (X2 and X5).
3) The curtains can be closed only while [Curtain close] (X11) on the operation panel is being
pressed. The curtains close until their inward limits (X0 and X3).
4) The stage can be moved up only while [
#
Stage up] (X12) on the operation panel is being
pressed. The stage stops when it reaches the upper limit (X6).
5) The stage can be moved down only while [
$
Stage down] (X13) on the operation panel is
being pressed. The stage stops when it reaches the lower limit (X7).
6) The indicator lamps on the operation panel are lit or extinguished according to the operation
of the curtains and stage.
Output
Y0
Curtain open
command Curtains open when Y0 is ON. Curtains stop when Y0 is
OFF.
Y1
Curtain close
command Curtains close when Y1 is ON. Curtains stop when Y1 is
OFF.
Y2 Stage up
Stage moves up when Y2 is ON. Stage stops when Y2 is
OFF.
Y3 Stage down
Stage moves down when Y3 is ON. Stage stops when
Y3 is OFF.
Y5 Buzzer Sounds when Y5 is ON (Lamp on screen is lit).
Type Device No. Device name Operation