Mitsubishi MELSEC-F FX-TRN-BEG-E, User Manual

Page: 146 / 164

FX-TRN-BEG-E
D-16
C-3-3: Hopper
The hopper supplies parts.
C-3-4: Orange
The hopper supplies oranges.
• Appearance (side view) • Operation
Supply command
- As a supply command, an output (Y) is
assigned.
When the supply command output (Y) is
set ON, the hopper supplies a part.
The hopper supplies one part when the
output (Y) is turned ON once.
Set the output ON and OFF alternately if
continuous supply is required.
* If two or more parts are supplied at a
time, they will be crushed.
Hopper
Part
Conveyor
• Appearance (side view) • Operation
Orange supply command
- As an orange supply command, an output
(Y) is assigned.
When the supply command output (Y) is
s e t O N , o r a n g e s a r e c o n t i n u o u s l y
supplied.
Box detection sensor
- This sensor turns ON when it detects a
box under the feeder (NO contact).
This sensor is built in the feeder, and is
not displayed.
Orange passage sensor
- The input (X) of this sensor turns ON
when an orange is supplied and passes it
(NO contact).
Use this sensor to count the number of
oranges.
This sensor is built in the supplier, and is
not displayed.
Orange
Orange
motion
sensor
Box detection
sensor
Orange