Mitsubishi 1992 3000GT, Service Manual

Page: 1046 / 1308

BODY Glass
A
Section A Adhesive Window spacer
(1.06)
Section
64 (2.52)
27 (1.06)
Section C
Adhesive
mm (in.)
(6) After application of the adhesive, line up the matchmarks
on the glass and and force the glass lightly and
evenly for complete fitting.
(7) Remove adhesive from around and on the glass and
body surfaces using a spatula and wipe the surfaces
clean.
(8) After the work (installation of the glass), allow to stand
until the adhesive hardens.
Caution
If an infrared lamp or other means are used for quicker
hardening, keep the surface temperature
(140°F)
or lower.
(9) After about 30 minutes or more following bonding of the
glass to the tail gate, check for water leaks.
Caution
1. If the vehicle is to be moved, do so gently.
2.
When the checking for water leaks, do not squeeze
the hose end.
TSB Revision