Mitsubishi 1992 3000GT, Service Manual

Page: 430 / 1308

INTAKE AND EXHAUST
Charge Air Cooler
REMOVAL SERVICE POINT
ENGINE OIL COOLER REMOVAL
Disconnect the hose from the engine oil cooler and remove
the engine oil cooler only.
Air intake hose C
Air intake hose A
Air intake hose B
Air
l Matchmark
Charge
air
cooler
left
l
Matchmark
Hose
Pipe
right
Air D
INSTALLATION SERVICE POINTS
AIR INTAKE HOSE C AIR INTAKE HOSE B
AIR INTAKE HOSE A INSTALLATION
Engaging the notch with the A mark at points indicated by
the arrows, insert air intake hoses B and C until seated.
Insert the turbocharger end of air intake hoses B and C com-
pletely.
AIR COOLER AIR HOSE F
AIR HOSE E AIR HOSE B AIR HOSE G
INSTALLATION
Aligning the marks at the points indicated by the arrows,
insert securely into the stepped portion of the pipe or until
s e a t e d .
Caution
Be careful not to allow any foreign matter to get into
the hoses, pipes, or the charge air cooler itself.
AIR COOLER RIGHT AIR HOSE D
AIR HOSE C INSTALLATION
Aligning the marks at the points indicated by arrows, insert
securely into the stepped portion of the pipe.
Caution
Be careful not to allow any foreign matter to get into
the hoses, pipes, or the charge air cooler itself.
INSPECTION
l
Check the charge air cooler fins for bending, damage,
or foreign matter.
l
Check the charge air cooler hoses for cracking, damage,
or wear.
TSB Revision