Mitsubishi 1992 3000GT, Service Manual

Page: 764 / 1308

FRONT SUSPENSION
Stabilizer Bar
REMOVAL AND INSTALLATION
Pre-removal and Post-installation Operation
l
Front Exhaust Pipe Removal and installation
(Refer to GROUP 15 Exhaust Pipe and Main Muffler.)
l
Under Cover Removal and Installation
l
Left Member and Right Member Removal and
Installation (Refer to GROUP 32 Right Member,
Left Member and Crossmember.)
36 Nm
26
I
Removal steps
1. Transmission stay B
vehicles with automatic
transaxle>
2. Transfer (AWD)
(Refer to GROUP 22 Transfer.)
6
40 Nm
29
0 0 0 0 0 6 2 7
3. Stabilizer link
4. Stabilizer bar bracket mounting bolt
5. Stabilizer bar bracket
6. Bushing
7. Stabilizer bar
INSTALLATION SERVICE POINT
STABILIZER BAR BRACKET POSITIONING
(1) Align the bushing (LH) with the stabilizer bar marking
end and temporarily tighten the stabilizer bar bracket (LH).
(2) In this condition, mount the stabilizer bar bracket (RH)
and temporarily tighten it.
(3) Temporarily fix the both ends of the stabilizer bar to the
link and tighten the stabilizer bar bracket mounting bolts
to specification.
TSB Revision