Mitsubishi MOTORS OUTLANDER SPORT/RVR 2022 Owner'S Manual Download Page 403

Page: 403 / 535

(402,1)

[ Edit: 2021/ 2/ 10

Model: DG-D ]

5-152

Starting and driving

Follow these easy-to-use Fuel Efficient Driving
Tips to help you achieve the most fuel economy
from your vehicle.

1. Use smooth accelerator and brake pedal

application.

Avoid rapid starts and stops.

Use smooth, gentle accelerator and brake

application whenever possible.

Maintain constant speed while commut-

ing and coast whenever possible.

2. Maintain constant speed.

Look ahead to try and anticipate and

minimize stops.

Synchronizing your speed with traffic

lights allows you to reduce your number
of stops.

Maintaining a steady speed can minimize

red light stops and improve fuel effi-
ciency.

3. Use air conditioning (A/C) at higher vehicle

speeds.

Below 40 MPH (64 km/h), it is more

efficient to open windows to cool the
vehicle due to reduced engine load.

Above 40 MPH (64 km/h), it is more

efficient to use A/C to cool the vehicle
due to increased aerodynamic drag.

Recirculating the cool air in the cabin

when the A/C is on reduces cooling load.

4. Drive at economical speeds and distances.

Observing the speed limit and not

exceeding 60 MPH (97 km/h) (where
legally allowed) can improve fuel effi-
ciency due to reduced aerodynamic drag.

Maintaining a safe following distance

behind other vehicles reduces unneces-
sary braking.

Safely monitoring traffic to anticipate

changes in speed permits reduced brak-
ing and smooth acceleration changes.

Select a gear range suitable to road

conditions.

5. Use cruise control.

Using cruise control during highway

driving helps maintain a steady speed.

Cruise control is particularly effective in

providing fuel savings when driving on
flat terrains.

6. Plan for the shortest route.

Utilize a map or navigation system to

determine the best route to save time.

7. Avoid idling.

Shutting off your engine when safe for

stops exceeding 30-60 seconds saves
fuel and reduces emissions.

8. Buy an automated pass for toll roads.

Automated passes permit drivers to use

special lanes to maintain cruising speed

through the toll and avoid stopping and
starting.

9. Winter warm up.

Limit idling time to minimize impact to

fuel economy.

Vehicles typically need no more than 30

seconds of idling at start-up to effec-
tively circulate the engine oil before
driving.

Your vehicle will reach its ideal operat-

ing temperature more quickly while
driving versus idling.

10. Keeping your vehicle cool.

Park your vehicle in a covered parking

area or in the shade whenever possible.

When entering a hot vehicle, opening the

windows will help to reduce the inside
temperature faster, resulting in reduced
demand on your A/C system.

FUEL EFFICIENT DRIVING TIPS

Condition:

Summary of Contents for OUTLANDER SPORT/RVR 2022
























































































































































































































































































































































































































































































































































Search results

Summary of Contents for OUTLANDER SPORT/RVR 2022

Reviews:

Related manuals for OUTLANDER SPORT/RVR 2022

Brands by name

Popular brands

Mitsubishi MOTORS OUTLANDER SPORT/RVR 2022, Owner'S Manual

Search results

Summary of Contents for OUTLANDER SPORT/RVR 2022

Reviews:

Related manuals for OUTLANDER SPORT/RVR 2022

Brands by name

Popular brands