Mitsubishi MOTORS OUTLANDER SPORT/RVR 2022, Owner'S Manual

Page: 411 / 535

(410,1)
[ Edit: 2021/ 2/ 10 Model: DG-D ]
5-160
Starting and driving
light may illuminate.
.
When driving on extremely inclined sur-
faces such as higher banked corners, the
ASC may not operate properly and the
ASC warning light
may illuminate.
Do not drive on these types of roads.
.
When driving on an unstable surface such
as a turntable, ferry, elevator or ramp, the
ASC warning light
may illuminate.
This is not a malfunction. Restart the
engine after driving onto a stable surface.
.
If wheels or tires other than the Mitsubishi
Motors recommended ones are used, the
ASC may not operate properly and the
ASC warning light
may illuminate.
.
The ASC is not a substitute for winter tires
or tire chains on a snow covered road.
HOW TO TURN OFF THE ASC
The vehicle should be driven with the Active
stability control (ASC) ON for most driving
conditions.
When the vehicle is stuck in mud or snow, the
ASC reduces the engine output to reduce wheel
spin. The engine speed will be reduced even if
the accelerator is depressed to the floor. If
maximum engine power is needed to free a
stuck vehicle, turn the ASC off.
WAF0456X
Example
To turn off the ASC, perform the following
steps in the multi-information display.
1. Push the button on the left-side of
the steering wheel until “Settings” is
displayed.
2. Use the scroll dial to select “ASC Setting”
and then push it.
3. Select “System” and push the scroll dial.
The indicator light will illuminate.
Turn “ASC Setting” back on in the multi-
information display or restart the engine to turn
on the ASC.
The chassis control is an electric control module
that includes the following functions:
.
Active Yaw Control (AYC)
.
Active Ride Control
ACTIVE YAW CONTROL
(AYC)
This system enhances vehicle cornering perfor-
mance and vehicle stability with management of
vehicle turning power (yaw moment) by con-
trolling the drive power difference of the left
and right wheels and the braking force when the
vehicle does not turn in response to steering
input, such as when the steering wheel is turned
quickly or when driving on slippery road.
When the ASC system is turned off, AYC is
also turned off.
Amount of brake control is changed based on
Drive Mode selector switch.
When AYC is not functioning properly, the
master warning light illuminates, and warning
message “Chassis control” will also appear in
the multi-information display.
If the chassis control warning message appears
in the multi-information display, it may indicate
that AYC is not functioning properly. Have the
system checked as soon as possible. It is
recommended that you visit an authorized
Mitsubishi Motors dealer for this service. (See
“Multi-information display warnings and indi-
CHASSIS CONTROL
Condition: