Mitsubishi MOTORS OUTLANDER SPORT/RVR 2022 Owner'S Manual Download Page 473

Page: 473 / 535

(472,1)

[ Edit: 2021/ 2/ 10

Model: DG-D ]

8-20

Do-it-yourself

CAUTION

Be careful not to allow children to swallow
the battery and removed parts.

An improperly disposed battery can harm
the environment. Always confirm local
regulations for battery disposal.

When changing the battery, do not let dust
or oil get on the components.

There is danger of explosion if the lithium
battery is incorrectly replaced. Replace
only with the same or equivalent type.

WAI0192X

Replace the battery in the F.A.S.T.-key as
follows:

1. Remove the emergency key from the F.A.S.

T.-key.

2. Insert a small screwdriver into the slit of the

corner and twist it to separate the upper part
from the lower part. Use a cloth to protect

the casing.

3. Replace the battery with a new one.

Recommended battery:

CR2032 or equivalent

Do not touch the internal circuit and

electric terminals as doing so could
cause a malfunction.

Hold the battery by the edges. Holding

the battery across the contact points will
seriously deplete the storage capacity.

Make sure that the

side faces the

bottom of the case.

F.A.S.T.-KEY BATTERY REPLACEMENT

Condition:

Summary of Contents for OUTLANDER SPORT/RVR 2022
























































































































































































































































































































































































































































































































































Search results

Summary of Contents for OUTLANDER SPORT/RVR 2022

Reviews:

Related manuals for OUTLANDER SPORT/RVR 2022

Brands by name

Popular brands

Mitsubishi MOTORS OUTLANDER SPORT/RVR 2022, Owner'S Manual

Search results

Summary of Contents for OUTLANDER SPORT/RVR 2022

Reviews:

Related manuals for OUTLANDER SPORT/RVR 2022

Brands by name

Popular brands