Mitsubishi MOTORS OUTLANDER SPORT/RVR 2022, Owner'S Manual

Page: 170 / 535

(169,1)
[ Edit: 2021/ 2/ 10 Model: DG-D ]
Auto-reverse function (if so
equipped)
WARNING
There are some small distances immediately
before the closed position which cannot be
detected. Make sure that all passengers have
their hands, etc., inside the vehicle before
closing the window.
If the control unit detects something caught in
the window as it is closing, the window will be
immediately lowered.
The auto reverse function can be activated when
the window is closed by automatic operation
when the ignition switch is in the ON position
or for 45 seconds after the ignition switch is
placed in the OFF position.
Depending on the environment or driving
conditions, the auto reverse function may be
activated if an impact or load similar to
something being caught in the window
occurs.
If the windows do not close auto-
matically
If the power window automatic function (clos-
ing only) does not operate properly, perform the
following procedure to initialize the power
window system.
1. Start the engine.
2. Close the door.
3. After starting the engine, open the window
completely by operating the power window
switch.
4. Pull the power window switch and hold it to
close the window, and then hold the switch
more than 3 seconds after the window is
closed completely.
5. Release the power window switch. Operate
the window by the automatic function to
confirm the initialization is complete.
WARNING
When the auto-reverse function is canceled, the
window will not automatically reverse even if
the control unit detects an obstacle. Make sure
that all passengers have their hands, etc. inside
the vehicle before closing the windows.
If the power window automatic function does
not operate properly after performing the
procedure above, it is recommended you have
your vehicle checked by an authorized
Mitsubishi Motors dealer.
Instruments and controls
2-77
Condition: