Mitsubishi MOTORS OUTLANDER SPORT/RVR 2022, Owner'S Manual

Page: 149 / 535

(148,1)
[ Edit: 2021/ 2/ 10 Model: DG-D ]
2-56
Instruments and controls
Automatic High Beam (AHB)
The Automatic High Beam (AHB) system will
operate when the vehicle is driven at speeds of
approximately 34 MPH (55 km/h) and above. If
an oncoming vehicle or leading vehicle appears
in front of your vehicle when the headlight high
beam is on, the headlight will be switched to the
low beam automatically.
Precautions on Automatic High Beam
(AHB):
WARNING
.
The Automatic High Beam (AHB) system
is a convenience but it is not a substitute
for safe driving operation. The driver
should remain alert at all times, ensure
safe driving practices and switch the high
beams and low beam manually when
necessary.
.
The high beam or low beam may not
switch automatically under the following
conditions. Switch the high beam and low
beam manually.
— During bad weather (rain, fog,
snow, wind, etc.).
— When a light source similar to a
headlight or tail light is in the
vicinity of the vehicle.
— When the headlights of the on-
coming vehicle or the leading
vehicle are turned off, when the
color of the light is affected due to
foreign materials on the lights, or
when the light beam is out of
position.
— When there is a sudden, contin-
uous change in brightness.
— When driving on a road that
passes over rolling hills, or a road
that has level differences.
— When driving on a road with
many curves.
— When a sign or mirror-like sur-
face is reflecting intense light
towards the front of the vehicle.
— When the container, etc. being
towed by a leading vehicle is
reflecting intense light.
— When a headlight on your vehicle
is damaged or dirty.
— When the vehicle is leaning at an
angle due to a punctured tire,
being towed, etc.
.
The timing of switching the low beam and
high beam may change under the following
situations.
— The brightness of the headlights
of the oncoming vehicle or leading
vehicle.
— The movement and direction of
the oncoming vehicle and the
leading vehicle.
— When only one light on the
oncoming vehicle or the leading
vehicle is illuminated.
— When the oncoming vehicle or the
leading vehicle is a two-wheeled
vehicle.
— Road conditions (incline, curve,
the road surface, etc.).
— The number of passengers and
the amount of cargo.
Condition: