Mitsubishi MOTORS OUTLANDER SPORT/RVR 2022, Owner'S Manual

Page: 122 / 535

(121,1)
[ Edit: 2021/ 2/ 10 Model: DG-D ]
CAUTION
If the oil replacement indicator is displayed,
change the engine oil within two weeks or less
than 500 miles (800 km).
Operating the vehicle with deteriorated oil can
damage the engine.
To reset oil control system:
1. Place the ignition switch in the ON position.
2. Push the and buttons on the
steering wheel until “Settings” appears in
the multi-information display. Use the scroll
dial to select “Maintenance”. Then, push the
scroll dial.
3. Select the “Oil Control System” and push
the scroll dial.
4. Push the scroll dial according to the reset
instructions displayed at the bottom of the
“Oil Control System” maintenance screen.
Oil and Filter (if so equipped):
This indicator appears when user set distance
comes for changing the engine oil and filter.
You can set or reset the distance for checking or
replacing these items.
Tire:
This indicator appears when the customer set
distance comes for replacing tires. You can set
or reset the distance for replacing tires.
WARNING
The tire replacement indicator is not a
substitute for regular tire checks, including
tire pressure checks. See “Replacing tires and
wheels” (P.8-30). Many factors including tire
inflation, alignment, driving habits and road
conditions affect tire wear and when tires
should be replaced. Setting the tire replace-
ment indicator for a certain driving distance
does not mean your tires will last that long. Use
the tire replacement indicator as a guide only
and always perform regular tire checks. Fail-
ure to perform regular tire checks, including
tire pressure checks could result in tire failure.
Serious vehicle damage could occur and may
lead to a collision, which could result in serious
personal injury or death.
Other:
This indicator appears when the customer set
distance comes for checking or replacing
maintenance items other than the engine oil,
oil filter and tires. Other maintenance items can
include such things as air filter or tire rotation.
You can set or reset the distance for checking or
replacing the items.
Customize Display
The display settings allows you to choose from
the various meter selections. The displayed
menu items vary depending on the vehicle’s
equipment.
The display settings can be changed using the
scroll dial.
Main Menu Selection:
Displays available screens that can be shown in
the multi-information display.
The available items vary depending on the
vehicle’s equipment.
Navigation Settings:
This menu allows user to turn the Navigation
Settings ON or OFF.
Cruise Screen:
The ”Cruise Screen” allows you to turn the
cruise screen transition on or off.
Welcome Effect:
The “Welcome Effect” displays the available
welcome effect settings.
.
Animation
Instruments and controls
2-29
Condition: