Mitsubishi MOTORS OUTLANDER SPORT/RVR 2022, Owner'S Manual

Page: 461 / 535

(460,1)
[ Edit: 2021/ 2/ 10 Model: DG-D ]
8-8
Do-it-yourself
WAI0118X
WAI0119X
Oil filler cap
Oil drain plug
Oil filter
Engine oil and filter
1. Place a large drain pan under the drain plug
.
2. Remove the oil filler cap .
3. Remove the drain plug with a wrench and
completely drain the oil.
WARNING
.
Prolonged and repeated contact with used
engine oil may cause skin cancer.
.
Try to avoid direct skin contact with used
oil. If skin contact is made, wash thor-
oughly with soap or hand cleaner as soon
as possible.
.
Keep used engine oil out of reach of
children.
CAUTION
Be careful not to burn yourself, as the engine
oil is hot.
. Waste oil must be disposed of prop-
erly.
. Check your local regulations.
(Perform steps 4 to 7 only when the engine
oil filter change is needed.)
4. Loosen the oil filter with an oil filter
wrench. Remove the oil filter by turning it
by hand.
5. Wipe the engine oil filter mounting surface
with a clean rag.
CAUTION
Be sure to remove any old gasket material
remaining on the mounting surface of the
engine. Failure to do so could lead to engine
damage.
6. Coat the gasket on the new filter with clean
engine oil.
7. Screw in the oil filter clockwise until a
slight resistance is felt, then tighten addi-
tionally more than 2/3 turn.
Oil filter tightening torque:
11 to 15 ft-lb
(14.7 to 20.6 N·m)
8. Clean and re-install the drain plug with a
new washer. Securely tighten the drain plug
with a wrench.
Condition: