Mitsubishi MOTORS OUTLANDER SPORT/RVR 2022, Owner'S Manual

Page: 62 / 535

(61,1)
[ Edit: 2021/ 2/ 10 Model: DG-D ]
The child restraint top tether strap must be used
when installing the child restraint with the seat
belts.
First, secure the child restraint with the seat
belt.
1. Remove the head restraint and store it in a
secure place. Be sure to reinstall the head
restraint when the child restraint is re-
moved.
See “Head restraints” (P.1-12) for head
restraint adjustment, removal and installa-
tion information.
2. Position the top tether strap over the
seatback.
3. Secure the top tether strap to the tether
anchor point shown on the illustration.
4. Refer to the appropriate child restraint
installation procedure steps in this section
before tightening the tether strap.
If you have any questions when installing a
top tether strap, it is recommended you visit
an authorized Mitsubishi Motors dealer for
this service.
BOOSTER SEATS
Precautions on booster seats
WARNING
If a booster seat and seat belt are not used
properly, the risk of a child being injured or
killed in a sudden stop or collision greatly
increases:
.
Make sure the shoulder portion of the belt
is away from the child’s face and neck and
the lap portion of the belt does not cross
the stomach.
.
Make sure the shoulder belt is not behind
the child or under the child’s arm.
.
A booster seat must only be installed in a
seating position that has a lap/shoulder
belt.
Booster seats of various sizes are offered by
several manufacturers. When selecting any
booster seat, keep the following points in mind:
. Choose only a booster seat with a label
certifying that it complies with Federal
Motor Vehicle Safety Standard 213 or
Motor Vehicle Restraint Systems and Boos-
ter Seats Safety Regulations (RSSR).
. Check the booster seat in your vehicle to be
sure it is compatible with the vehicle’s seat
and seat belt system.
Safety — Seats, seat belts and supplemental restraint system
1-43
Condition: