Mitsubishi MOTORS OUTLANDER SPORT/RVR 2022, Owner'S Manual

Page: 270 / 535

(269,1)
[ Edit: 2021/ 2/ 10 Model: DG-D ]
WAF0449X
Home position (central position)
Shifting
To move the shift lever,
: Push the button to shift.
: Shift without pushing the button .
Push the park button to shift to the P (Park)
position.
After starting the engine, fully depress the brake
pedal, push the shift lever button
and move
the shift lever from the P (Park) position to
any of the desired shift positions.
Confirm that the vehicle is in the desired shift
position by checking the shift indicator located
on the shift lever or on the multi-information
display.
WARNING
Apply the electric parking brake if the shift
lever is in any position while the engine is not
running. Failure to do so could cause the
vehicle to move unexpectedly or roll away and
result in serious personal injury or property
damage.
CAUTION
.
Use the P (Park), R (Reverse) or D (Drive)
position only when the vehicle is comple-
tely stopped.
.
When switching to the desired shift posi-
tion by operating the shift lever, check that
the shift lever returns to the central
position by releasing your hand from the
lever. Holding the shift lever in a mid-way
position may also damage the shift control
system.
.
Do not operate the shift lever while the
accelerator pedal is depressed. This may
cause a sudden start which could result in
an accident.
.
The following operations are not allowed
because excessive force would be applied to
the transmission and this may result in
damage to the vehicle:
— Moving the shift lever to the R
(Reverse) position when driving
forward
— Moving the shift lever to the D
(Drive) position when reversing
If these operations are attempted, a chime
sounds and the vehicle shifts to the N
(Neutral) position.
P (Park):
CAUTION
.
To prevent transmission damage, use the P
(Park) position only when the vehicle is
completely stopped.
.
Do not slide the shift lever while pushing
the park button. This may damage the
shift control system.
NOTE:
When the shift is in the P position, an
operational noise may be heard from the
lower part of the vehicle due to the evacua-
tion operation of the vehicle. This is not a
Starting and driving
5-19
Condition: