Mitsubishi MOTORS OUTLANDER SPORT/RVR 2022, Owner'S Manual

Page: 362 / 535

(361,1)
[ Edit: 2021/ 2/ 10 Model: DG-D ]
in the navigation map data), the Speed Adjust
by Route uses road information provided by the
navigation system and can adjust the vehicle
speed depending on curves, junctions and exits.
The system may not always reduce speed for all
curves, junctions or exits and the driver may
need to apply additional braking at any time.
When the vehicle is through the curve or
junction, the vehicle will accelerate again to
the set speed. When exiting the limited access
freeway, the driver will need to apply braking at
the end of the exit.
NOTE:
.
The system does not operate when the
accelerator pedal is depressed.
. The system may not operate depending
on the set distance to the vehicle ahead
and vehicles detected ahead.
WAF0729X
Example
System display and indicators:
1. Road information indicator
Appears when the system adjusts the speed
depending on turns or exits.
Curves and junctions
Exits
How to activate or deactivate the sys-
tem:
1. Push the button on the steering
wheel until “Settings” appears in the multi-
information display, and push the scroll
dial.
2. Use the scroll dial to select “Driver
Assistance”. Then push the scroll dial.
3. Select “Speed Adjust by Route” and push
the scroll dial to turn the system on or off.
NOTE:
The system will retain current settings in the
multi-information display even if the engine
is restarted.
ACC system limitations
WARNING
Listed below are the system limitations for the
ACC system. Failure to operate the vehicle in
accordance with these system limitations could
result in serious injury or death:
.
The ACC system is primarily intended for
use on highways and freeways. It is not
advisable to use the ACC system in city/
urban traffic.
.
The ACC system will not adapt automati-
cally to road conditions. This system
Starting and driving
5-111
Condition: