Mitsubishi MOTORS OUTLANDER SPORT/RVR 2022, Owner'S Manual

Page: 483 / 535

(482,1)
[ Edit: 2021/ 2/ 10 Model: DG-D ]
8-30
Do-it-yourself
Tire size Front Rear
P235/60-
R18
P255/45-
R20
240 KPA,
35 PSI
240 KPA,
35 PSI
Tire pressures should be checked, and
adjusted if necessary, at least once a
month.
Pressures should be checked more
often whenever weather temperatures
change severely, because tire pressures
change with outdoor temperatures. The
pressures listed are always “cold infla-
tion pressure”.
Cold inflation pressure is measured
after the vehicle has been parked for at
least three hours or is driven less than 1
mile (1.6 km) after having been parked
for three hours.
Cold inflation pressure must not go
above the maximum values molded
into the tire sidewall. After driving
several miles, your tire inflation pres-
sure may increase 2 to 6 psi (14 to 41
kPa) from the cold inflation pressure.
Do not let air out of the tires to get
back to the specified cold pressure, or
your tires will be too low.
Check your tires each time you refuel.
If one tire looks lower than the others,
check the pressure for all of them.
You should also take the following
safety precautions:
.
Keep your tires inflated to the
recommended pressures. (See the
tire and loading information placard
attached to the driver’s door sill.)
.
Stay within the recommended load
limits.
.
Make sure that the weight of any
load in your vehicle is evenly
distributed.
.
Drive at safe speeds.
.
After filling your tires to the correct
pressure, check them for damage
and air leaks. Be sure to reinstall the
caps on the valve stems.
REPLACING TIRES AND
WHEELS
CAUTION
.
Avoid using different size tires from the
one listed and the combined use of
different types of tires, as this can affect
driving safety.
Refer to “Wheels and tires” (P.10-8).
.
Always use tires of the same size, same
type, and same brand, and which have no
wear differences. Using tires that differ in
size, type, brand or the degree of wear, will
increase the differential oil temperature,
resulting in possible damage to the driving
system. Further, the drive train will be
subjected to excessive loading, possibly
leading to oil leakage, component seizure,
or other serious problems.
.
Only Mitsubishi Motors genuine wheels
should be used, because your vehicle is
equipped with a tire pressure monitoring
system (TPMS).
Use of another type of wheel risks air leaks
and sensor damage, as it will not be
possible to install the tire pressure sensor
properly.
Condition: