Mitsubishi MOTORS Lancer 2017, Owner'S Manual

Page: 89 / 385

Free-hand Advanced Security Transmitter (F.A.S.T.-key) (if so equipped)
5-24 Features and controls
5
1. [For vehicles with manual transaxle]
Push the emergency key in at the “ACC”
position and keep it depressed until it is
turned to the “LOCK” position, and
remove.
[For vehicles with continuously variable
transmission (CVT)]
First, set the selector lever to the “P”
(PARK) position, and then slowly turn the
ignition switch to the “LOCK” position
while pressing it.
2. Install the cover of the ignition switch.
3. Reinsert the emergency key into the
F.A.S.T.-key.
Steering wheel lock
NOTE
 When the ignition switch cannot be turned
from the “LOCK” position to the “ACC”
position, turn the ignition switch while turn-
ing the steering wheel in both directions.
To turn from “ACC” to “LOCK”
NOTE

For vehicles with CVT, the emergency key
cannot be removed unless the selector lever
is set to the “P” (PARK) position.
NOTE
 Always install the cover of the ignition
switch when not using the emergency key.
Not doing so could cause damage if foreign
material such as dust gets into the keyhole of
the ignition switch.
CAUTION
 Do not turn the ignition switch to the LOCK
position while the vehicle is moving. This
will cause the steering wheel to lock, making
it impossible to operate the vehicle.
 If the engine is stopped while driving, the
power brake booster will stop functioning
and greater effort for braking will be
required. Also, the power steering system
will not function and it will require greater
effort to manually steer the vehicle.
 Do not leave the ignition switch in the “ON”
position for a long time when the engine is
not running. The battery will run down.
 Do not turn the ignition switch to the
“START” position when the engine is run-
ning. It will damage the starter motor.
BK0237700US.book 24 ページ ２０１６年４月１５日 金曜日 午前１１時２８分