manualshive.com logo in svg

Mitsubishi MOTORS Lancer 2017, Owner'S Manual

The Mitsubishi MOTORS Lancer 2017 Owner's Manual is available for free download on our website. This comprehensive manual provides essential information on operating and maintaining your Lancer, ensuring a smooth and enjoyable driving experience. Visit manualshive.com to access your downloadable copy today.

Share
Download
background image

Mitsubishi Motors genuine parts

3-6

General information

3

Only Mitsubishi Motors approved acces-
sories should be fitted to your vehicle.

Improper installation of electrical parts
could cause fire. Refer to the “Modifica-
tion/alterations to the electrical or fuel
systems” section within this owner’s man-
ual.

Using a cellular phone or radio set inside
the vehicle without an external antenna
may cause electrical system interference,
which could lead to unsafe vehicle opera-
tion.

Tires and wheels which do not meet spec-
ifications must not be used.
Refer to the “Specifications” section for
information regarding wheel and tire
sizes.

Due to the large number of accessory and
replacement parts provided by different man-
ufacturers in the market, it is not always pos-
sible for an authorized Mitsubishi Motors
dealer to check whether the attachment or
installation of non-Mitsubishi Motors genu-
ine parts will affect the driving safety of your
Mitsubishi-vehicle.

N00301800040

Mitsubishi Motors manufactures high quality
vehicles with an emphasis on safety.  It is
important to consult an authorized Mitsubishi
Motors dealer before installation of any
accessory which may involve modification of
the electrical or fuel systems.

N00301400105

Mitsubishi Motors Genuine Parts are
designed and manufactured to meet high stan-
dards of performance, and are recommended
for all of your maintenance needs. Also avail-
able from your Mitsubishi Motors dealer are
a wide variety of accessories to personalize
your new vehicle. Each Mitsubishi vehicle
has a selection of Mitsubishi Motors autho-
rized accessories to choose from to tailor your
new vehicle to your own personal preference.
Your Mitsubishi Motors dealer’s Parts Man-
ager has information on various audio sys-
tems, protection items, as well as interior and
exterior accessories available for your spe-
cific model.

N00300100017

Certain components of this vehicle, such as
airbag modules, seat belt pretensioners, and
button cell batteries, may contain perchlorate
materials.
Special handling may apply. For additional
information, see www.dtsc.ca.gov/hazardous-
waste/perchlorate.

WARNING

If you choose to use a cellular phone while
driving, you must not allow that usage to
distract you in the safe operation of your
vehicle. Anything, including cellular
phone usage, that distracts you from the
safe operation of your vehicle increases
your risk of an accident.
Refer to and follow all state and local laws
in your area regarding cellular phone
usage while driving.

Important point! 

Modification/alterations to the 
electrical or fuel systems 

CAUTION

Please consult an authorized Mitsubishi
Motors dealer concerning any such acces-
sory fitment or modification. 
If the wires interfere with the vehicle body or
improper installation methods are used (pro-
tective fuses not included, etc.), electronic
devices may be adversely affected, resulting
in a fire, vehicle damage, or other accident.

Mitsubishi Motors genuine 
parts 

California Perchlorate 
Materials Requirements 

BK0237700US.book  6 ページ  ２０１６年４月１５日　金曜日　午前１１時２８分

Summary of Contents for Lancer 2017


































































































































































































































































































































































































Reviews:

No comments

Related manuals for Lancer 2017

TATA Motors Nano Owner'S Manual & Service Book preview
Nano
Brand: TATA Motors Pages: 94
GÄN GA Manual preview
GA
Brand: GÄN Pages: 24
Jabra TOUR Get Started preview
TOUR
Brand: Jabra Pages: 10
Carefree Slideout Cover Service Manual preview
Slideout Cover
Brand: Carefree Pages: 12
CITROEN PICASSO XSARA DESIRE 1.6 - MESUREMENT Manual preview
PICASSO XSARA DESIRE 1.6 - MESUREMENT
Brand: CITROEN Pages: 2
UGREEN Car Cup Holder Phone Mount Manual preview
Car Cup Holder Phone Mount
Brand: UGREEN Pages: 9
Audiovox Code Alarm PROFESSIONAL SERIES CA 5550SST Owner'S Manual preview
Code Alarm PROFESSIONAL SERIES CA 5550SST
Brand: Audiovox Pages: 14
Raptor Series MAGNUM RT Series Manual preview
MAGNUM RT Series
Brand: Raptor Series Pages: 6
BMW 51 47 0 027 792 Installation Instructions Manual preview
51 47 0 027 792
Brand: BMW Pages: 7
Ford 2007 Navigator (Spanish) Owner'S Manual preview
2007 Navigator
Brand: Ford Pages: 728
Westin 58-53935 Installation Instructions preview
58-53935
Brand: Westin Pages: 5
Alphasonik PCP15LDE Owner'S Manual preview
PCP15LDE
Brand: Alphasonik Pages: 8
Webasto Telestart T70 Installation Instructions Manual preview
Telestart T70
Brand: Webasto Pages: 23
Mitsubishi Montero 1988 Manual preview
Montero 1988
Brand: Mitsubishi Pages: 367
GROM Audio VLINE Installation Manual preview
VLINE
Brand: GROM Audio Pages: 20
Griffin Technology iTrip Bluetooth User Manual preview
iTrip Bluetooth
Brand: Griffin Technology Pages: 6
Mitsubishi Pajero Pinin 1999 Workshop Manual preview
Pajero Pinin 1999
Brand: Mitsubishi Pages: 919
JBA 1528S Installation Instructions And Warranty Information preview
1528S
Brand: JBA Pages: 5

Brands by name

Popular brands

Load more brands