Mitsubishi MOTORS Lancer 2017, Owner'S Manual

Page: 96 / 385

Free-hand Advanced Security Transmitter (F.A.S.T.-key) (if so equipped)
Features and controls 5-31
5
1. Turn the ignition switch to the “LOCK”
position. If you started the engine with the
key, remove the key from the ignition
switch.
2. Open the driver’s door and turn the com-
bination headlights and dimmer switch to
the “OFF” position.
3. Press the LOCK button (1) for 4 to 10 sec-
onds and press the UNLOCK button (2)
during this time.
4. Release in sequence the UNLOCK and
LOCK buttons within 10 seconds of
pressing the UNLOCK button in step 3.
The turn signal lights answerback function
can be set to the following seven conditions.
Each time the turn signal lights answerback
function is set, a chime will sound to tell you
the condition of the answerback function.
1. Turn the ignition switch to the “LOCK”
position. If you started the engine with the
key, remove the key from the ignition
switch.
2. Open the driver’s door and turn the com-
bination headlights and dimmer switch to
the “OFF” position.
3. Press the UNLOCK button (2) for 4 to 10
seconds and press the LOCK button (1)
during this time.
4. Release in sequence the UNLOCK and
LOCK buttons within 10 seconds of
pressing the LOCK button in step 3.
The buzzer answerback function can be
turned ON or OFF as required.
N00544601112
The door unlock function can be set to the
following two conditions.
Each time the door unlock function is set, a
chime will sound to tell you the condition of
the door unlock function.
1. Turn the ignition switch to the “LOCK”
position. If you started the engine with the
key, remove the key from the ignition
switch.
2. Open the driver’s door and turn the com-
bination headlights and dimmer switch to
the “OFF” position.
3. Press the LOCK button (1) for 4 to 10 sec-
onds and press the UNLOCK button (2)
during this time.
4. Release in sequence the LOCK and
UNLOCK buttons within 10 seconds of
pressing the LOCK button in step 3.
N00544700015
If you are near your vehicle and feel threat-
ened, you can activate the alarm to call atten-
tion as follows:
1. Press the PANIC button (4) for more than
1 second.
Changing the setting of the turn signal
lights answerback function
Number of
chimes
Condition
To lock To unlock
One chime One flash Two flashes
Two chimes One flash No flash
Three chimes No flash Two flashes
Four chimes Two flashes One flash
Five chimes No flash One flash
Six chimes Two flashes No flash
Seven
chimes
No flash No flash
Buzzer deactivation/reactivation
Setting of door unlock function
Number of
chimes
Condition
To lock To unlock
Number of
chimes
Condition
One chime All doors unlock
Two chimes Driver’s door unlock only
Using the panic alarm
BK0237700US.book 31 ページ ２０１６年４月１５日 金曜日 午前１１時２８分