Mitsubishi MOTORS Lancer 2017, Owner'S Manual

Page: 212 / 385

Bluetooth® 2.0 interface (if so equipped)
Features and controls 5-147
5
5. Enter in the Bluetooth
®
device the 4-digit
number that has been read out in Step 4.
6. The voice guide will say “Please say the
name of the device after the beep.” You
can assign a desired name for the Blue-
tooth
®
device and register it as a device
tag. Say the name you want to register
after the beep.
7. The voice guide will say “Pairing Com-
plete. Would you like to import the con-
tacts from your mobile device now?”
Answer “Yes,” and the voice guide will
say “Please wait while the contacts are
imported. This may take several minutes.”
Answer “No” to end the pairing process.
If your device requires a specific pairing
code, you need to set the pairing code. Follow
the procedures below.
1. Press the SPEECH button.
2. Say “Setup.”
3. Say “Pairing Options.”
4. Say “Set Code.”
5. The voice guide will say “Do you want
the pairing code to be random or fixed?”
Say “Fixed.”
6. The voice guide will say “Please say a 4-
digit pairing code.” Say a 4-digit number.
7. The voice guide will say “Pairing code set
to <pairing code>.”
When the confirmation function is on, the
system will confirm whether the number
said is acceptable. Answer “Yes.”
Answer “No,” the system will return to
Step 6.
 The pairing code entered here is only used
for the Bluetooth
®
connection certification.
Depending on the connection settings of the
Bluetooth
®
device, this code may have to be
entered each time you connect the Blue-
tooth
®
device to the Bluetooth
®
2.0 inter-
face. For the default connection settings,
refer to the instructions for the device.
NOTE
 Depending on the Bluetooth
®
device, it may
take a few minutes to pair it with the Blue-
tooth
®
2.0 interface.
 If the Bluetooth
®
2.0 interface cannot recog-
nize the Bluetooth
®
device, the voice guide
will say “Pairing has timed out” and the pair-
ing process will be cancelled.
Confirm that the device you are pairing sup-
ports Bluetooth
®
, and try pairing it again.
NOTE
 If you enter the wrong number, the voice
guide will say “Pairing failed” and the pair-
ing process will be cancelled.
Confirm the number is right, and try pairing
it again.
If your device requires a specific pairing
code, you need to set the pairing code. Refer
to the device manual for pairing code
requirements and read the next section “If
your device requires a specific pairing code”
on page 5-147.
NOTE
 When the confirmation function is on, after
repeating the device tag you have said, the
voice guide will ask “Is this correct?”
Answer “Yes.”
To change the device tag, answer “No” and
then say the device tag again.
NOTE
If your device requires a specific pairing
code
BK0237700US.book 147 ページ ２０１６年４月１５日 金曜日 午前１１時２８分