Mitsubishi MOTORS Lancer 2017 Owner'S Manual Download Page 272

Page: 272 / 385

Operation Keys

Comfort controls

7-25

Turn the power on, and resume playback
from the previous status.

2. Press the PWR/VOL key.

Turn the power OFF.

N00716500023

1. Turn the PWR/VOL key to adjust the vol-

ume.

Turn the PWR/VOL key clockwise to
increase, and counter- clockwise to
decrease the volume.

N00716600024

1. Insert the disc into the disc slot with the

label surface up.

Push the disc in a certain amount, and the
product will pull the disc in, and playback
will start.

2. Press the

key.

This will eject the disc from the product,
so remove the disc.

NOTE



Hold down the steering MODE key to also
turn the audio function ON/OFF.

Adjust Volume

AFA109400

NOTE



The maximum value for volume is 45, and
the minimum is 0.



The initial setting for volume is “17”.

Insert/Eject Discs

AFA109413

CAUTION



When replacing discs, first ensure that the
vehicle is stopped in an area in which stop-
ping is permitted.



Do not insert your hand, fingers, or foreign
objects into the disc slot. This may lead to
injury, smoking, or fire.



3 inches (8 cm) CDs are not supported.

Disc

Label side

Disc slot

BK0237700US.book 25 ページ２０１６年４月１５日　金曜日　午前１１時２８分

Summary of Contents for Lancer 2017


































































































































































































































































































































































































Search results

Summary of Contents for Lancer 2017

Reviews:

Related manuals for Lancer 2017

Brands by name

Popular brands

Mitsubishi MOTORS Lancer 2017, Owner'S Manual

Search results

Summary of Contents for Lancer 2017

Reviews:

Related manuals for Lancer 2017

Brands by name

Popular brands