Mitsubishi MOTORS Lancer 2017 Owner'S Manual Download Page 290

Page: 290 / 385

Display Indicator

Comfort controls

7-43

N00717700022

This explains content of the display indicator.

N00717800065

You can change the content of the display
indicator.
Press the INFO key to switch the display con-
tent.

Each time the INFO key is pressed, the dis-
play content changes.

This switches in the order “Frequency”, “Sta-
tion name”, and “Radio text”.

Display Indicator

Change the Display Mode

CAUTION



The operation of changing display contents
may impede safe driving, therefore check
safety before operation.

NOTE



Up to 11 characters may be displayed at one
time. To display 12 or more characters, press
the PAGE key, and subsequent characters
will be displayed.

During FM Reception

NOTE



Radio text has a maximum display of 64
characters.



If there is no text information to display, then
“NO MESSAGE” is displayed.

BK0237700US.book 43 ページ２０１６年４月１５日　金曜日　午前１１時２８分

Summary of Contents for Lancer 2017


































































































































































































































































































































































































Search results

Summary of Contents for Lancer 2017

Reviews:

Related manuals for Lancer 2017

Brands by name

Popular brands

Mitsubishi MOTORS Lancer 2017, Owner'S Manual

Search results

Summary of Contents for Lancer 2017

Reviews:

Related manuals for Lancer 2017

Brands by name

Popular brands