Mitsubishi MOTORS Lancer 2017, Owner'S Manual

Page: 172 / 385

Multi-information display
Features and controls 5-107
5
N00557100130
The fuel consumption display unit can be
changed. The distance, speed, and amount
units are also changed to match the selected
fuel consumption unit.
1. Press and hold the multi-information
meter switch (for about 2 seconds or
more) to change from the setting mode
screen to the menu screen.
Refer to “Changing the function settings
(With ignition switch in the “ON” posi-
tion)” on page 5-105.
2. Lightly press the multi-information meter
switch to select “AVG UNIT” (fuel con-
sumption display unit setting).
3. Press and hold the multi-information
meter switch (for about 2 seconds or
more) to display “AVG UNIT” (fuel con-
sumption display unit setting).
4. Lightly press the multi-information meter
switch to switch in sequence from km/L

L/100 km

mpg (US)

mpg (UK)

RETURN

km/L.
5. Press and hold the multi-information
meter switch (for about 2 seconds or
more) to change the setting to the selected
unit.
NOTE
 The average speed display and average fuel
consumption display can be reset separately
in both auto reset mode and manual reset
mode.
 The average speed display memories and
average fuel consumption memories for auto
reset mode and manual reset mode are erased
if the battery is disconnected.
 The initial (default) setting is “Auto reset
mode”.
Changing the fuel consumption
display unit
Type 1
Type 2
NOTE

The display units for the driving range, the
average fuel consumption, the average speed
and the momentary fuel consumption are
changed, but the units for the indicating nee-
dle (speedometer), the odometer and the trip
odometer will remain unchanged.
 If the battery is disconnected, the memory of
the unit setting is erased and is automatically
set to {mpg (US) or L/100 km}.
Type 2
Type 1
BK0237700US.book 107 ページ ２０１６年４月１５日 金曜日 午前１１時２８分