Mitsubishi MOTORS Lancer 2017, Owner'S Manual

Page: 24 / 385

Modifications to and racing of your vehicle
General information 3-5
3
7. To close, turn the fuel tank filler cap
slowly clockwise until you hear clicking
sounds, then gently push the fuel tank
filler door closed.
N00301600048
This vehicle should not be modified with
non-Mitsubishi Motors genuine parts. Mit-
subishi Motors designs and manufactures
high quality vehicles with an emphasis on
safety and durability. Modifications using
non-Mitsubishi Motors genuine parts may
affect the performance, safety and/or durabil-
ity of your vehicle, and may violate applica-
ble state and/or federal regulations.
DAMAGE OR PERFORMANCE PROB-
LEMS RESULTING FROM MODIFICA-
TIONS TO OR RACING OF YOUR
VEHICLE ARE NOT COVERED
UNDER WARRANTY.
Examples of modifications to your vehicle
that can cause damage or performance prob-
lems include the following:
 Failure to use Mitsubishi Motors genuine
parts
 Failure to use required fuel and fluids
 Failure to use proper size tires and wheels
 Modification of the fuel, intake, exhaust,
emission, suspension, engine, drive train
or electrical wiring systems
 Modification of any onboard com-
puter/control module, including repro-
gramming, or replacing/adding chips to
any onboard computer/control module
Review the Warranty and Maintenance Man-
ual for further details regarding warranty cov-
erage.
N00301701235
 The installation of accessories, optional
parts, etc., should only be carried out
within the limits prescribed by law in the
driving area and in accordance with the
guidelines and warnings contained within
the documents accompanying this vehicle.
WARNING
 Make sure the fuel cap is securely closed.
If the fuel cap is loose, fuel could leak,
resulting in a fire.
CAUTION
 If you need to replace the fuel tank filler cap,
use only the cap specified for your model
vehicle.
NOTE
 If the fuel tank filler cap is not tight while
driving, the engine malfunction indicator
(“SERVICE ENGINE SOON” or “Check
engine light”) may come on when the
onboard diagnostic (OBD) system performs
a self check.
Always tighten the fuel tank filler cap until
you hear clicking sounds.
The indicator will go off after driving several
times. If the indicator does not go off, con-
tact your authorized Mitsubishi Motors
dealer or a repair facility of your choice as
soon as possible.
Modifications to and racing
of your vehicle
Installation of accessories
CAUTION
 Before any electrical or electronic accesso-
ries are installed, consult an authorized
Mitsubishi Motors dealer.

Your vehicle is equipped with a diagnosis
connector (data link connector) for checking
and servicing the electronic control system.
Mitsubishi Motors does not recommend con-
necting a device other than the Scan Tool for
inspections and service to this connector
because an unexpected problem could result.
In addition, malfunctions caused by connect-
ing a device other than the Scan Tool may
not be covered under warranty.
BK0237700US.book 5 ページ ２０１６年４月１５日 金曜日 午前１１時２８分