Mitsubishi MOTORS Lancer 2017 Owner'S Manual Download Page 284

Page: 284 / 385

Listen to Audio Files on a USB Device

Comfort controls

7-37

Hold down the 1RPT key.

Repeat playback of the tracks within the
folder currently being played.

Press the 2RDM key.

Play tracks in the folder currently being
played in a random order.

Hold down the 2RDM key.

Play the tracks in all folders in a random
order.

Press the SCAN key.

Play the first 10 seconds of each of the tracks
on the whole USB device in order.

Hold down the SCAN key.

Play the first 10 seconds of the first track in
each folder on the USB device in order.

Search folders and files, and select a track.

1. Turn the

/SEL key to select the folder.

2. Press the

/SEL key.

Files within the selected folder are dis-
played.

3. Turn the

/SEL key to select the file.

4. Press the

/SEL key.



Selecting a file will cancel this.
However, it will not be cancelled in vehicles
with a Bluetooth

2.0 interface.

Folder Repeat Playback

NOTE



Pressing again will cancel.



Selecting a folder will cancel this.



Cycling up/down through files will cancel
this.



Even if the file is selected, folder repeat
playback will not be cancelled.

Folder Random Playback (RDM)

NOTE



Pressing again will cancel.



Selecting a folder will cancel this.

NOTE



Cycling up/down through files will cancel
this.



Even if the file is selected, folder random
playback will not be cancelled.

All Folder Random Playback

NOTE



Pressing again will cancel.



Selecting a folder will cancel this.



Cycling up/down through files will cancel
this.



Even if the file is selected, all folder random
playback will not be cancelled.

Scan Playback (SCAN)

NOTE



Press this button again during playback if
you wish to hear that track, and that track
will play normally.

Folder Scan Playback

NOTE



Press this button again during playback if
you wish to hear that track, and that track
will play normally.

Search Tracks

BK0237700US.book 37 ページ２０１６年４月１５日　金曜日　午前１１時２８分

Summary of Contents for Lancer 2017


































































































































































































































































































































































































Search results

Summary of Contents for Lancer 2017

Reviews:

Related manuals for Lancer 2017

Brands by name

Popular brands

Mitsubishi MOTORS Lancer 2017, Owner'S Manual

Search results

Summary of Contents for Lancer 2017

Reviews:

Related manuals for Lancer 2017

Brands by name

Popular brands