Mitsubishi MOTORS Lancer 2017 Owner'S Manual Download Page 354

Page: 354 / 385

Replacement of light bulbs

Vehicle care and maintenance

9-35

3. To install the bulb, perform the removal

steps in reverse.

N00917301711

1. To create enough work space, turn the

steering wheel all the way in the direction
opposite to the side you wish to replace.

2. Remove the clips (A), and screws (B) or

bolts (B) to turn up the cover (C).

3. Turn the socket (D) counterclockwise to

remove it.

4. Pull the bulb out of the socket.

5. To install the bulb, perform the removal

steps in reverse.

N00943401436

1. Remove the clips (A) and clips (B), then

remove the duct (C) and the upper cover
(D).

Front side-marker lights (for
vehicles with high intensity dis-
charge headlights)

Front turn signal lights

BK0237700US.book 35 ページ２０１６年４月１５日　金曜日　午前１１時２８分

Summary of Contents for Lancer 2017


































































































































































































































































































































































































Search results

Summary of Contents for Lancer 2017

Reviews:

Related manuals for Lancer 2017

Brands by name

Popular brands

Mitsubishi MOTORS Lancer 2017, Owner'S Manual

Search results

Summary of Contents for Lancer 2017

Reviews:

Related manuals for Lancer 2017

Brands by name

Popular brands