Mitsubishi MOTORS Lancer 2017 Owner'S Manual Download Page 289

Page: 289 / 385

Listen to Bluetooth Audio (if so equipped)

7-42

Comfort controls

2. Press the 5

key. Bluetooth Audio play-

back starts.

Press the

key or

key to select the

track.

This enables selection of the next or previous
track.

Hold down the 3

key or the 4

key.

Fast forward/rewind is possible.

Repeat playback, random playback, and scan
playback are possible.

Press the 1RPT key.

Repeat playback of the track currently being
played.

Press the 2RDM key.

Play the tracks in the Bluetooth Audio device
in a random order.

Press the SCAN key.

Play the first 10 seconds of each of the tracks
on the whole Bluetooth Audio device in
order.

NOTE



Hold down the 5

key to pause.



Press the 6

key to stop.

Select the Track (File)

Fast Forward or Rewind

Switch Playback Mode

Repeat Playback (RPT)

NOTE



Each time the 1RPT key is pressed, this
switches in the order Repeat OFF, 1 track
repeat, All track repeat, and Repeat OFF.

Random Playback (RDM)

NOTE



Pressing again will cancel.

Scan Playback (SCAN)

NOTE



Press this button again during playback if
you wish to hear that track, and that track
will play normally.

BK0237700US.book 42 ページ２０１６年４月１５日　金曜日　午前１１時２８分

Summary of Contents for Lancer 2017


































































































































































































































































































































































































Search results

Summary of Contents for Lancer 2017

Reviews:

Related manuals for Lancer 2017

Brands by name

Popular brands

Mitsubishi MOTORS Lancer 2017, Owner'S Manual

Search results

Summary of Contents for Lancer 2017

Reviews:

Related manuals for Lancer 2017

Brands by name

Popular brands