manualshive.com logo in svg

Mitsubishi Electric PQHY-P120THMU-A, Service Handbook

Introducing the Mitsubishi Electric PQHY-P120THMU-A Service Handbook, a comprehensive manual providing in-depth information and guidance for optimal use of this exceptional product. Available for free download from manualshive.com, this user manual ensures hassle-free operations and allows users to harness the full potential of their Mitsubishi Electric PQHY-P120THMU-A.

Share
Download
background image

[ 

VII 

 Control ]

- 146 -

HWE09080

GB

-7- Refrigerant Recovery Control <PQHY>

Recovery of refrigerant is performed during heating operation to prevent the refrigerant from accumulating inside the unit while 
it is stopped (unit in fan mode), or inside the indoor unit that is in cooling mode or in heating mode with thermo off. It is also 
performed during cooling operation to prevent an excessive amount of refrigerant from accumulating in the heat source heat 
exchanger. 

(1) During heating operation

Starting refrigerant recovery mode

The refrigerant recovery mode in heating starts when all of the following three conditions are met:

Œ

15 minutes have passed since the completion of previous refrigerant recovery.

Œ

TH4 > 115°C [239°F]

Œ

Frequencies below 50 Hz

Refrigerant recovery

1)   Refrigerant is recovered with the LEV on the applicable indoor unit (unit under stopping mode, fan mode, cooling, heating with 

thermo off) being opened for 30 seconds.

2)   Periodic capacity control of the heat source units and periodic LEV control of the indoor units will be suspended during refrig-

erant recovery operation; they will be performed after the recovery has been completed.

(2) During cooling operation

Starting refrigerant recovery mode

The refrigerant recovery mode starts when all the following conditions are met:

Œ

30 minutes have passed since the completion of previous refrigerant recovery.

Œ

When the unit keeps running for 3 minutes in a row or more with high discharge temperature

Œ

TH4 > 105°C [221°F] or 63HS1 > 3.43 MPa [497 psi] (35 kg/cm

2

G) and SC0 > 10°C [18°F]

Refrigerant recovery

The opening of LEV1 is increased and periodic control begins again.

-8- Refrigerant Recovery Control <PQRY>

Refrigerant recovery is performed for each BC port during heating operation to prevent the refrigerant from accumulating in-
side the units that are stopped (in the fan mode), in the cooling mode, or in the heating Thermo-OFF mode.
It is also performed during cooling operation to prevent an excessive amount of refrigerant from accumulating in the heat 
source heat exchanger.

Starting criteria for the refrigerant recovery cycle (during Cooling-only, Cooling-main, Heating-only, or Heating-main 
mode)

The refrigerant recovery mode starts when all of the following conditions are met:

1)   When 5 minutes have passed in the Heating-only or Heating-main mode or 30 seconds have passed in the Cooling-only or 

Cooling-main mode since the completion of the previous refrigerant recovery cycle AND the when following conditions are 
met. 
TH4 > 105°C [221°F]

2)   When the port is not in the 4-minute restart delay mode

Starting criteria for the refrigerant recovery cycle (during Cooling-only, Cooling-main, Heating-only, or Heating-main 
mode)

1)   When the port is in the cooling Thermo-OFF, fan, or stop mode 

SV

C at the port turns on for 30 seconds. ( 

 indicates port No.)

2)   The opening of LEV1 and LEV3 is increased.

-9- Capacity Control of Heat Exchanger<PQHY>

(1) Control method

Œ

Depending on the capacity required, the rotation speed of the heat source unit fan is controlled by the inverter to keep a con-

stant condensing temperature of (water tempe10°C [50°F]) during cooling operation and a constant evaporation tem-
perature of (0°C [32°F] =0.71 <Pa [103psi]) during heating operation.

Œ

The OS in the multiple-heat source-unit system operates at the actual heat source unit fan control value that is calculated by 

the OS based on the preliminary heat source unit fan control value that the OC determines.

Opening of LEV during refrigerant recovery
Opening of indoor unit LEV: 400 pulses

Initial opening of LEV

Start

Finish

30 seconds

Summary of Contents for PQHY-P120THMU-A































































































































































































































































































































































































































Reviews:

No comments

Related manuals for PQHY-P120THMU-A

AAF AV Operation And Maintenance preview
AV
Brand: AAF Pages: 4
Addvent AVAC9000 Installation Instructions & User Manual preview
AVAC9000
Brand: Addvent Pages: 18
Airwell OU10-47T Service Manual preview
OU10-47T
Brand: Airwell Pages: 55
Hyundai HYUAP580 Instruction Manual preview
HYUAP580
Brand: Hyundai Pages: 52
Friedrich VERT-I-PAK B-SERIES Installation & Operation Manual preview
VERT-I-PAK B-SERIES
Brand: Friedrich Pages: 20
Zibro P 28 Operating Manual preview
P 28
Brand: Zibro Pages: 16
Danby DAC12078EE Owner'S Instructions Manual preview
DAC12078EE
Brand: Danby Pages: 19
Suntec Wellness Klimatronic AirCare 1000 VirusEx H14 Ion Manual preview
Klimatronic AirCare 1000 VirusEx H14 Ion
Brand: Suntec Wellness Pages: 87
arcelik 09565 User Manual preview
09565
Brand: arcelik Pages: 33
INVENTOR RFI-66B User Manual preview
RFI-66B
Brand: INVENTOR Pages: 80
Hunter 40862 Series Owner'S Manual preview
40862 Series
Brand: Hunter Pages: 24
HACE CB-17 User Manual preview
CB-17
Brand: HACE Pages: 9
Rasonic RS-PV9VK Operating Instructions Manual preview
RS-PV9VK
Brand: Rasonic Pages: 24
Tesla TA36FFLL-1232IA User Manual preview
TA36FFLL-1232IA
Brand: Tesla Pages: 288
Perfect Aire PASC10000 User Manual preview
PASC10000
Brand: Perfect Aire Pages: 21
Panasonic S-TE9HKE Operating Instructions Manual preview
S-TE9HKE
Brand: Panasonic Pages: 56
Haier HSU-09CG04 User Manual preview
HSU-09CG04
Brand: Haier Pages: 23
Haier HSU-12CH13 HSU-083C01 User Manual preview
HSU-12CH13 HSU-083C01
Brand: Haier Pages: 26

Brands by name

Popular brands

Load more brands