Mitsubishi Electric FR-A8ND, Instruction Manual

Page: 99 / 104

98
OBJECT MAP
(  : Available,

: Not available)

Differ according to capacities.
0x29 1 41 Output assembly 

─
0x2A 1 4
NetRef (speed command
source)
The value can be written
while the inverter is
running.
When the speed command
source is set to
communication, the values
cannot be written while the
inverter is running.
75
0x2A 1 9 Actual current 0.01 A/0.1 A increments

0.1 A increments
0x2A 1 17 Output voltage 0.1 V increments 1 V increments
0x2A 1 18 Acceleration time
Period of time from 0 to
reach
Pr.20 Acceleration/
deceleration reference
frequency
(Pr.7, Pr.8)
0.1 s increments
Period of time from 0 to
reach
Pr.18 High speed
maximum frequency
1 ms increments
0x2A 1 19 Deceleration time
0x2A 1 114 Run command (Set)
STOP and RES are not
available STOP and RES are
available
Communication status at error reset by the Fault Reset bit of the
DeviceNet communication or by Class 0x29 Instance 1 Attribute 12
Communication stops Communication continues
45 , 47 ,
49 , 53 ,
73
Writing to Class 0x29 Instance 1 Attribute 5 (NetCtrl) during inverter
running
Write is available. Write is not available. 72
Operation when both STF and STR are simultaneously turned ON
through the DeviceNet communication
(Forward rotation command and the reverse rotation command of the
I/O communication or Run1 and Run2 of Class 0x29)
Inverter stop by
simultaneously turning ON
the forward rotation
command and reverse
rotation command
The previous status of the
start signal is held even
though the forward rotation
command and reverse
rotation command are
simultaneously turned ON.
47 , 49 ,
53 , 72
Class
ID
Instance
ID
Attribute
ID
Name
FR-A5ND
compatible mode
Normal mode
(FR-A8ND)
Refer
to page