17
2
Set with parameter (Pr.345)
After setting the node address switches to "64 or higher", set the inverter parameter (
Pr.345 DeviceNet address
). When the
node address switches are set to "0 to 63", the node address switch setting is valid. The setting is applied at the next power-
ON or inverter reset. (Refer to
Setting with master
After setting the node address switches to "64 or higher", set "Class 0x03, Instance 1, Attribute 1" using the master. The setting
value is applied to
Pr.345
. When the node address switches are set to "0 to 63", the node address switch setting is valid. (Refer
to
)
All connections are released and a set value is immediately applied.
