Mitsubishi Electric FR-A8ND, Instruction Manual

Page: 77 / 104

76
OBJECT MAP
9 Get
CurrentActual
(output current)
INT 2
0 to
3276.7 A
The output current is monitored in 0.1 A increments.
15 Get
PowerActual
(output power)
INT 2
0 to
65535 W
Output power is monitored in 1 W increments.
17 Get
OutputVoltage
(output voltage)
INT 2
0 to
3276.7 V
The output voltage is monitored in 0.1 V increments.
18 Get/Set
AccelTime
(acceleration time)
UINT 2
0 to
65535 ms
Acceleration time = Pr.7

( Pr.18 / Pr.20 )
Set the increments in ms regardless of the Pr.21
setting.
19 Get/Set
DecelTime
(deceleration time)
UINT 2
0 to
65535 ms
Deceleration time = Pr.8

( Pr.18 / Pr.20 )
Set the increments in ms regardless of the Pr.21
setting.
20 Get/Set
LowSpdLimit
(minimum frequency)
(Pr.2)
UINT 2
0 to
65535 r/min
Minimum speed (1 r/min increments)
Conversion of frequency and speed depends on the
Pr.144 settings. (Refer to page 37 )
21 Get/Set
HighSpdLimit
(maximum frequency)
(Pr.18)
UINT 2
0 to
65535 r/min
Maximum speed (1 r/min increments)
Conversion of frequency and speed depends on the
Pr.144 settings. (Refer to page 37 )
29 Get
RefFromNet
(speed command
source monitor)
BOOL 1
0 Other than DeviceNet communication operation
1 DeviceNet communication operation
Class 0x2A Instance 1
Attribute
ID
Access Name
Data
type
No. of
data bytes
Range Definition