Mitsubishi Electric FDF100VNVD, Technical Manual

Page: 7 / 211

- -
'11 • PAC-T-160
Indoor unit FDF140VD
FDF140VNXVD
Outdoor unit FDC140VNX
Power source
220-240V~50Hz / 220V~60Hz
Operation data Cooling Heating
Nominal capacity kW 14.0 [ 5.0 (Min.)~16.0 (Max.)] 16.0 [ 4.0 (Min.)~18.0 (Max.)]
Power consumption kW 4.65 4.69
Running current A 20.6 / 21.6 20.8 / 21.8
Power factor
％
98 98
Inrush current A 5 < Max.running current 24 >
Sound Pressure Level dB(A) P-Hi : 54 Hi : 50 Me : 48 Lo : 44 Cooling : 49 Heating : 52
Exterior dimensions
Height x Width x Depth
Exterior appearance Ceramic White Stucco White
(Munsell color) (N8.0) near equivalent (4.2Y7.5/1.1) near equivalent
Net weight kg 52 105
Refrigerant equipment
Compressor type & Q'ty
—
RMT5134MDE2 × 1
Starting method
—
Direct line start
Refrigerant oil
・ —
0.9 M-MA68
Heat exchanger Louver fine & inner grooved tubing M shape fin & inner grooved tubing
Refrigerant control
—
Electronic expansion valve
Air handling equipment
Fan type & Q'ty Centrifugal fan × 1 Propeller fan × 2
Motor <Starting method> W 157 < Direct line start > 86 × 2 < Direct line start >
Air flow(Standard) CMM P-Hi : 29 Hi : 26 Me : 23 Lo : 19 100
External static pressure Pa 0
Outside air intake Not possible
—
—
Air filter, Q'ty Plastic net × 1 (Washable)
—
Shock & vibration absorber Rubber sleeve (for fan motor) Rubber sleeve (for Compressor )
Insulation (noise & heat) Polyurethane form
—
Electric heater W
—
20 (Crank case heater)
Remote controller RC-E4 Installed / wireless : RCN-KIT3-E (option)
Room temperature control Thermostat by electronics
—
Safety equipment Overload protection for fan motor Internal thermostat for fan motor
Frost protection thermostat
Abnormal discharge temperature protection.
Installation data
Refrigerant piping size
Connecting method
Flare piping Flare piping
Refrigerant line (one way) length
Vertical height difference between
outdoor unit and indoor unit
Refrigerant
Quantity R410A 4.5kg in outdoor unit (incl. the amount for the piping of : 30m)
Drain pump
— —
Drain
Insulation for piping
Necessary (both Liquid & Gas lines)
Standard Accessories Mounting kit Edging
Notes (1) The data are measured at the following conditions.
(2) This packaged air-conditioner is manufactured and tested in conformity with the ISO.
(3) Sound pressure level indicates the value in an anechoic chamber. During operation
these value are somewhat higher due to ambient temperature.ner is operated at 230V50Hz or 220V60Hz.
(4) The operation data indicates when the air-conditio
(5) If wireless remote controller is used, only 3-speed fan setting (Hi-Me-Lo) is available.
Item
mm
1,850 × 600 × 320 1,300 × 970 × 370
mm
Hose Connectable with VP20
Max.30m (Outdoor unit is higher)
Max.15m (Outdoor unit is lower)
See page 43
Max.100m
Indoor air temperature
Operation
DB
27
o
C
20
o
C 7
o
C 6
o
C
19
o
C 35
o
C 24
o
C
WB DB WB
Cooling
Heating
Item
Outdoor air temperature
Model
Adapted to
RoHS
directive
Holes size
φ
20 × 3pcs
Liquid line: I/U φ 9.52 (3/8") Pipe φ 9.52 (3/8") × 0.8 O/U φ 9.52 (3/8")
Gas line:
φ
15.88 (5/8")
φ
15.88 (5/8") × 1.0
φ
15.88 (5/8")
PGA000Z780