8
- 20
8.3 Printer Unit
8.3.2 Installing procedure
3
Depending on the use environment such as when fastening cable is difficult, attach a cable clamp to the
printer unit.
Be sure to attach the cable clamp to section A (see the following figure) with its band positioned outside
and press it until it clicks.
For the band inserting direction, refer to the arrow.
(As a cable clamp, "RST-1NB" manufactured by TAKEUCHI INDUSTRY CO.LTD. is used.)
4
Insert the dedicated printer connection cable in the looped cable clamp band and pull the band to fasten
the cable.
2
Unit installation
1
Power off the GOT.
2
Remove one extension unit cover of the GOT.
3
Fit the printer unit along the groove of the GOT case.
A
Cable clamp
In the case a cable
clamp is attached
