18
- 14
18.5 CoreOS
18.5.2 When the CoreOS cannot be installed
18.5.2 When the CoreOS cannot be installed
When the CoreOS cannot be installed, confirm the following item.
If the CoreOS cannot be installed even after checking the following item, the error may be caused by a
hardware failure.ss
Please consult your local Mitsubishi (Electric System) Service center or representative.
Error
Action
The CoreOS installation is not executed even when
installing the CF card in the GOT.
(1) Check whether the CF card access switch of the GOT is on.
If the switch is off, switch it on.
(2) The writing from the GT Designer2 to the memory card may not
have been completed normally.
Execute the writing from the GT Designer2 to the memory card
again.
The message is displayed
on the GOT
GOT error. Contact your local
sales office.
The GOT main unit is broken.
Please consult your local Mitsubishi (Electric System) Service center or
representative.
CF card error.
Installation will be cancelled.
Check whether the CF card can
be used.
The CF card is defective.
(1) Format the CF card and re-execute.
(2) Replace the CF card.
Optional unit has been
connected to extension I/F slot.
The optional unit should be
removed before starting
installation.
Installation will be canceled.
Remove the extension unit installed on the GOT.
GOT type and OS version do
not match.
Installation will be canceled.
The GOT type selected at [Core OS write] of the GT Designer2 is not
correct.
Confirm the GOT type and perform [Core OS write] again.
The version of OS is not
acceptable to this GOT.
Installation will be canceled.
Confirm the version of OS.
Install CoreOS from the latest GT Designer2.
Memory card access switch is
off.
Turn on the switch and restart
the GOT.
Installation will be canceled.
The CF card access switch is off. Turn the switch on and restart the
GOT.
