8.15 Attachment
8.15.1 Applicable attachment
8
- 55
1
OV
E
R
VI
EW
2
SYSTE
M
CO
N
F
IG
UR
A
T
IO
N
3
S
P
E
CI
F
ICA
T
ION
S
4
P
A
R
T
NA
ME
AND
SETTING
S
5
EMC AND
LO
W
VO
LT
AG
E
DIRE
CT
IVE
6
INS
TAL
L
A
TI
ON
7
WIRING
8
OP
TIO
N
8.15 Attachment
The attachment is used to replace A960GOT, AC97 GOT to GT156 (8.4").
If use attachment when replace A960GOT or AC97 GOT to GT156 , there is no need of additional
processing as mounting hole of the inside control panel etc. which is used for A960GOT, A97 GOT.
8.15.1 Applicable attachment
The following attachments are applicable for GT156 .
8.15.2 Installing procedure
1
Hang the two upper hooks on the upper part over the mounting holes in
the control panel.
2
While lifting the attachment upward, hang the two lower hooks on the
lower part of the control panel.
3
Fix the attachment to the control panel with four clamp screws in the
torque range of 0.82 to 1.10N·m.
4
Place the GOT into the attachment from the front, and fix it by tightening
the mounting screws included with the GOT in the torque range of 0.36
to 0.48N·m.
5
Precautions when the attachment is installed
Model
Description
GT15-60ATT-96
Attachment for 8.4"
A960GOT GT156
GT15-70ATT-97
A97 GOT GT156
• The attachment can be used when the mounting panel thickness is 2 to 3mm.
If the installation panel thickness exceeds 3mm, the GOT cannot be replaced by
using the attachment.
• Replacing GOT with the attachment does not compliant with the standard IP65,
IP67, NEMA4 of the waterproof and dustproof.
