14
- 16
14.7 I/O Check
14.7.1 I/O check function
14.7 I/O Check
14.7.1 I/O check function
The I/O check is a function which checks whether GOT and PLC can communicate with each other.
If I/O check ends normally, the communication interface and the connection cable hardwares are normal.
To execute I/O check, the communication driver has to be installed in GOT in advance from GT Designer2.
Refer to the following for the details related to the installation of the communication driver.
GT Designer2 Version Basic Operation/Data Transfer Manual
(8. TRANSFERRING DATA)
(1) Communication drivers inapplicable to I/O check
When the following communication drivers are used, the I/O check cannot be executed.
Connection type
Communication driver
Connection
to
MITSUBISHI
PLC
MELSECNET/H
connection
MELSECNET/H
MELSECNET/10
connection
MELSECNET/H, MELSECNET/10
CC-Link connection
(Intelligent device
station)
CC-Link(ID), CC-Link Ver.2(ID)
Ethernet connection
QJ71E71/AJ71(Q)E71
Connection to YASKAWA PLC
YASKAWA GL/CP9200(SH/H)/CP9300MS, Ethernet (YASKAWA)
Connection to YOKOGAWA PLC
YOKOGAWA FA500/FA-M3/STARDOM, Ethernet (YOKOGAWA)
Connection to Allen-Bradley PLC
EtherNet/IP(AB)
Connection to SIEMENS PLC
SIEMENS S7-200, SIEMENS S7-300/400
Microcomputer connection
Computer
Connection to FUJI SYS temperature
controller
FUJI PXR/PXG/PXH
Connection to YAMATAKE temperature
controller
YAMATAKE SDC/DMC
Connection to RKC temperature
controller
RKC SR Mini HG(MODBUS)
Inverter connection
FREQROL 500/700
